《金属材料专业词汇》由会员分享，可在线阅读，更多相关《金属材料专业词汇（9页珍藏版）》请在文档大全上搜索。
1、For personal use only in study and research; not for commercial use奥氏体 Austenite 奥氏体碳钢 Austenite Carbon Steel 奥氏铁孻回火 Austempering 半静钢 Semi-killed steel 包晶反应 Peritectic Reaction 包晶合金 Peritectic Alloy 包晶温度 Peritectic Temperature 薄卷片及薄片(0.3至2.9mm厚之片)机械性能Mechanical Properties of Thin StainlessSteel(Thic
2、k ness from 0.3mm to 2.9mm)- strip/sheet杯突测试 (厚度: 0.4 公厘至 1.6 公厘，准确至 0.1 公厘 3 个试片平均数 ) Erichsen test (Thickness: 0.4mm to 1.6mm, figure round up to 0.1mm) 贝氏体钢片 Bainite Steel Strip 比电阻 Specific resistivity & specific resistance 比较抗磁体、顺磁体及铁磁体 Comparison of Diamagnetism, Paramagnetic &
3、 Ferromagnetism 比热 Specific Heat 比重 Specific gravity & specific density边缘处理 Edge Finish扁线、半圆线及异形线 Flat Wire, Half RoundWire, Shaped Wire and Precision Shaped Fine Wire 扁线公差 Flat Wire Tolerance 变态点 Transformation Point 表面保护胶纸 Surface protection film 表面处理 Surface finish 表面处理 Surface Treatment
4、不破坏检验 Non - destructive inspections 不锈钢 Stainless Steel不锈钢-种类，工业标准，化学成份，特点及 主要用途StainlessSteel -Type, Industrial Standard, Chemical Composition, Characteristic & end usage of the most commonly used Stainless Steel 不锈钢薄片用途例 End Usage of Thinner Gauge 不锈钢扁线及半圆线常用材料 Commonly used materials for
5、Stainless Flat Wire & Half Round Wire 不锈钢箔、卷片、片及板之厚度分类 Classification of Foil, Strip, Sheet & Plate by Thickness 不锈钢材及耐热钢材标准对照表 Stainless and Heat-Resisting Steels 不锈钢的磁性 Magnetic Property & Stainless Steel 不锈钢的定义 Definition of Stainless Steel 不锈钢基层金属 Stainless Steel as Base
6、Metal 不锈钢片、板用途例 Examples of End Usages of Strip, Sheet & Plate 不锈钢片材常用代号 Designation of SUS Steel Special Use Stainless 不锈钢片机械性能 (301, 304, 631, CSP) Mechanical Properties of Spring use Stainless Steel不锈钢应力退火卷片常用规格名词图解 General Specification of Tension Annealed Stainless Steel Strips 不锈钢之分类，耐
7、腐蚀性及耐热性 Classification, Corrosion Resistant & Heat Resistance of Stainless Steel 材料的加工性能 Drawing abillity 插入型固熔体 Interstital solid solution 常用尺寸 Commonly Used Size 常用的弹簧不锈钢线 - 编号，特性，表面处理及化学成份 StainlessSpring Wire Nati onalSta ndard nu mber, Charateristic, Surface fin ish& ;amp;Chemical c
8、omposition 常用的镀锌钢片 (电解片) 的基层金属、用途、日工标准、美材标准及一般厚度 Base metal, application, JIS & ASTM standard, and Normal thickness of galvanized steel sheet 长度公差 Length Tolerance超耐热钢 Special Heat Resistance Steel 超声波探伤法 Ultrasonic inspection 冲击测试 Impact Test 冲剪 Drawing & stamping 初释纯铁体 Pro-entectoi
9、d ferrite 处理及表面状况 Finish & Surface 纯铁体 Ferrite 磁场 Magnetic Field 磁畴 Magnetic domain 磁粉探伤法 Magnetic particle inspection 磁化率 Magnetic Susceptibility (Xm) 磁矩 magnetic moment 磁力 Magnetic 磁力 Magnetic Force 磁偶极子 Dipole 磁性 Magnetisum 磁性变态 Magnetic Transformation 磁性变态点 Magnetic Transformation 磁性感应 M
10、agnetic Induction 粗珠光体 Coarse pearlite 淬火 Quenching 淬火及回火状态 Hardened & Tempered Strip/ Precision- QuenchedSteel Strip 淬火剂 Quenching Media 单相金属 Single Phase Metal 单相轧压镀锡薄铁片 ( 白铁皮 / 马口铁 ) Single-Reduced Tinplate 弹簧不锈钢线，线径及拉力列表 Stainless Spring Steel, Wire diameter and Tensile strength of Sprin
11、g Wire弹簧用碳钢片 CarbonSteel Strip For Spring Use 弹簧用碳钢片材之边缘处理 Edge Finished 弹性限 度、阳氏 弹性 系数 及屈服 点 elastic limit, Yeung's module of elasticity to yield point 倒后擦发条 Pull Back Power Spring 导热度 Heat conductivity 低碳钢或铁基层金属 Iron & Low Carbon as Base Metal 低碳马氏体不锈钢 Low Carbon Martensite Stainless S
12、teel 低温脆性 Cold brittleness 低温退火 Low Temperature Annealing 第二潜变期 Secondary Creep 第三潜变期 Tertiary Creep 第壹潜变期 Primary Creep 点焊 Spot welding 电镀金属钢片 Plate Metal Strip 电镀金属捆片的优点 Advantage of Using Plate Metal Strip 电镀锌(电解)钢片 Electro-galvanized Steel Sheet 电镀锌钢片的焊接 Welding of Electro-galvanized steel sheet
13、 电镀锌钢片或电解钢片 Electro-galvanized Steel Sheet/Electrolytic Zinc Coated Steel Sheet 电解 / 电镀锌大大增强钢片的防锈能力Galvanic Action improving Weather& Corrosion Resistance of the Base Steel Sheet 电解冷轧钢片厚度公差 Thickness Tolerance of Electrolytic Cold-rolled sheet 电炉 Electric furnace 电器及家电外壳用镀层冷辘 低碳 钢片 Coated (L
14、ow Carbon) Steel Sheets for Casing,Electricals & Home Appliances 电器用的硅 硅 钢片之分类 Classification of Silicon Steel Sheet for Electrical Use电器用钢片的绝缘涂层 Performance of Surface Insulation of Electrical Steel Sheets电器用钢片用家需自行应力退火原因Annealing of the Electrical SteelSheet电器用硅 硅 钢片 Electrical Steel Sheet
15、 电阻焊 Resistance Welding 定型发条 Constant Torque Spring 定型发条的形状及翻动过程 Shape and Spring Back of Constant Torque Spring 定型发条及上炼发条的驱动力 Spring Force of Constant Torque Spring and Wing-up Spring 定型发条驱动力公式及代号The Formula and Symbol of Constant TorqueSpring 镀层质量标记 Markings & Designations of Differential
16、Coatings 镀铬 Chrome Plated 镀黄铜 Brass Plated镀铝（硅）钢片-美材试标准（ASTM A-463-77）35.7 JIS G3314镀热浸铝片的机 械性能 Mechanical Properties of JIS G3314 Hot-Dip Aluminum-coated Sheets and Coils镀铝（硅）钢片 - 日工标准（JIS G3314） Hot-aluminum-coated sheets andcoils to JIS G 3314镀铝 （ 硅） 钢片及其它种类钢片的抗腐蚀性能比较 Comparsion of various resist
17、ance of aluminized steel & other kinds of steel镀铝 （ 硅） 钢片生产流程 Aluminum Steel Sheet, Production Flow Chart 镀铝硅钢片 Aluminized Silicon Alloy Steel Sheet 镀铝硅合金钢片的特色 Feature of Aluminized Silicon Alloy Steel Sheet 镀镍 Nickel Plated镀锡薄钢片 （ 白铁皮 / 马日铁 ） 制造过程 Production Process of Electrolytic Tinplate
18、镀锡薄铁片 （白铁皮/马口铁） （ 日工标准 JIS G3303） 镀锡薄铁片的构造 Construction of Electrolytic Tinplate 锻造 Fogging断面缩率 Reduction of area发条的分类及材料 Power Spring Strip Classification and Materials 发条片 Power Spring Strip 反铁磁体 Antiferromagnetism 方线公差 Square Wire Tolerance 防止生锈 Rust Protection 放射线探伤法 Radiographic inspection 非晶粒取
19、向电力用钢片的电力、磁力、机械性能及夹层系数 LaminationFactors of Electrical, Magnetic & Mechanical Non-Grain OrientedElectrical沸腾钢 （ 未净钢 ） Rimmed steel分类 Classification负磁力效应 Negative effect钢板 Steel Plate钢板订货需知 Ordering of Steel Plate 钢板生产流程 Production Flow Chart 钢板用途分类及各国钢板的工业标准包括日工标准及美材试标准 Type of steel Plate &
20、amp;amp; Related JIS, ASTM and Other Major Industrial Standards 钢材的熔铸、锻造、挤压及延轧 The Casting, Fogging, Extrusion, Rolling & Steel钢的脆性 Brittleness of Steel钢的种类 Type of Steel 钢铁的名称 Name of steel 钢铁的制造 Manufacturing of Steel 钢铁的主要成份 The major element of steel 钢铁生产流程 Steel Production Flow Chart 钢铁
21、用 " 碳 " 之含量来分类 Classification of Steel according to Carbon contents高锰钢铸 日工标准 High mangan ese steel to JIS sta ndard 高碳钢化学成份及用途 High Carbon Tool Steel, Chemical Composition and Usage 高碳钢片 High Carbon Steel Strip 高碳钢片用途 End Usage of High Carbon Steel Strip 高碳钢线枝 High Carbon Steel Wire Rod （t
22、o JIS G3506） 高温回火 High Temperature Tempering 格子常数 Lattice constant铬钢 -日工标准 JIS G4104 Chrome steel to JIS G4104铬镍不锈钢及抗热钢弹簧线材-美国材验学会ASTM A313 - 1987 Chromium -Nickel Stainless and Heat-resistingSteel Spring Wire - ASTMA313 - 1987铬系耐热钢 Chrome Heat Resistance Steel铬钼钢钢材 -日工标准 G4105 62 Chrome Molybde num
23、 steel to JIS G4105 各种不锈钢线在不同处理拉力比较表 Tensile Strength of various kinds of Stainless Steel Wire under Different Finish工业标准及规格-铁及非铁金属In dustrial Sta ndard- Ferrous & ;amp;Non ferrous Metal 公差 Size Tolerance 共晶 Eutectic 共释变态 Eutectoid Transformation 固熔体 Solid solution 光辉退火 Bright Annealing 光线（低碳钢线）
24、，火线（退火低碳钢线 ），铅水线 （ 镀锌低碳钢线 ）及制造钉用低 碳钢线之代号、公差及备注 Ordinary Low Carbon Steel Wire, Annealed Low Carbon Steel Wire, Galvanized low Carbon Steel Wire & Low Carbon Steel Wire for nail manufacturing - classification, Symbol of Grade, Tolerance and Remarks.硅含量对电器用的低碳钢片的最大好处 The Advantage of Using Sil
25、icon low Carbon Steel滚焊 Seam welding过共晶体 Hyper-ectectic Alloy过共释钢 Hype-eutectoid含硫易车钢 Sulphuric Free Cutting Steel含铅易车钢 Leaded Free Cutting Steel 含铁体不锈钢 Ferrite Stainless Steel 焊接 Welding 焊接合金 Soldering and Brazing Alloy 焊接能力 Weldability 镀铝钢片的焊接状态 （比较冷辘钢片） Tips on welding of Aluminized sheet in comp
26、arasion with cold rolled steel strip 合金平衡状态 Thermal Equilibrium 厚度及阔度公差 Tolerance on Thickness & Width 滑动面 Slip Plan 化学成份 Chemical Composition 化学结合 Chemical bond化学性能 Chemical Properties 化学元素 Chemical element 黄铜基层金属 Brass as Base Metal 回复柔软 Crystal Recovery 回火脆性 Temper brittleness 回火有低温回火及高温回
27、火 Low & High Temperature Tempering 回火状态 Annealed Strip 基层金属 Base Metal of Plated Metal Strip 机械性能 Mechanical Properites 机械性能 Mechanical properties 畸变 Distortion 级别、电镀方法、镀层质量及常用称号 Grade, Plating type, Designation of Coating Mass & Common Coating Mass 级别， 代号 ，扭曲特性及 可用 之线材直径 Classes, sy
28、mbols, twisting characteristic and applied Wire Diameters 级别， 代号及化学成 份 Classification, Symbol of Grade and Chemical Composition 挤压 Extrusion 加工方法 Manufacturing Method 加工性能 Machinability 简介 General 交换能量 Positive energy exchange 矫顽磁力 Coercive Force 金属变态 Transformation 金属材料的试验方法 The Method of Metal ins
29、pection 金属材料的性能及试验 Properties & testing of metal 金属的特性 Features of Metal 金属的相融、 相融温度、晶体反应及合金在共晶合金、 固熔孻共晶合金及偏晶反 应的比较 Equilibrium Comparision 金属间化物 Intermetallic compound 金属结晶格子 Metal space lattice 金属捆片电镀层 Plated Layer of Plated Metal Strip 金属塑性 Plastic Deformation 金属特性 Special metallic featur
30、es 金属与合金 Metal and Alloy 金相及相律 Metal Phase and Phase Rule 晶粒取向 (Grain-Oriented) 及非晶粒取向 (Non-Oriented) 晶粒取向，定取向芯钢片及高硼定取向芯钢片之磁力性能及夹层系数 ( 日工标准 及 美 材 标 准 ) Magnetic Properties and Lamination Factor of SI-ORIENT-CORE&S; I-ORIENT-CORE-HIB ElectricalSteel Strip (JIS andAISI Standard)晶粒取向电器用硅硅钢；片-高硼低
31、硫(LS)定取向 钢片之磁力及电力性 能 Magnetic and Electrical Properties of SI-ORIENT-CORE-HI-B-LS 晶粒取向电器用硅硅钢片-高硼(HI-B)定取向芯钢片及定取向芯钢片之 机械性能及夹层系数 Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B and SI-ORIENT-CORE Grain Orient Electrical Steel Sheets晶粒取向电器用硅硅钢片-高硼低硫(LS)定取向钢片之机械性能及夹层 系 数 Mechanical P
32、roperties and Lamination Factors of SI-ORIENT-CORE-HI-B-LS晶粒取向电器用硅(硅)钢片-高硼(HI-B)定取向 芯钢片，定取向芯钢片及高 硼低硫 (LS) 定取向芯钢片之标准尺寸及包装 Standard Forms and Size of SI-ORIENT-CORE-HI-B,SI-CORE, & SI-ORIENT-CORE-HI-B-LS Grain- 晶粒取向电器用硅(硅)钢片-咼硼(HI-B)定取向 芯钢片，定取向芯钢片及咼硼低 硫 (LS) 定 取 向 芯 钢 片 之 厚 度 及 阔 度 公 差 Physica
33、l Tolerance of SI-ORIENT-CORE-HI-B, SI-ORIENT-CORE, & SI-CORE-HI-B-LS Grain 晶粒取向电器用硅钢片 Grain-Oriented Electrical Steel晶粒取向 电器用 硅钢片主要工业标准 InternationalStandard -Grain-Oriented Electrical Steel Silicon Steel Sheet for Electrical Use 晶体结构 Crystal Pattern晶体结构，定向格子及单位晶格 Crystal structure, Space l
34、attice &Unit cell净磁矩 Net magnetic moment 绝缘表面 Surface Insulation 均热炉 Soaking pit 抗磁体 Diamagnetism 抗腐蚀及耐用 Corrosion & resistance durability 抗化学品能力 Chemical Resistance 抗敏感及环境保护 Allergic, re-cycling & environmental protection 抗热超级合金 Heat Resistance Super Alloy 扩散退火 Diffusion Ann
35、ealing 拉尺发条 Measure Tape 拉伸测试 ( 顺纹测试 ) Elongation test 冷冲及冷锻用碳钢线枝 Carbon Steel Wire Rods for Cold Heading & Cold Forging (to JIS G3507) 冷拉钢板重量表 Cold Drawn Steel Bar Weight Table 冷拉钢枝材 Cold Drawn Carbon Steel Shafting Bar 冷拉高碳钢线 Hard Drawn High Carbon Steel Wire 冷轧钢片 Cold-Rolled Steel Sheet/S
36、trip冷轧高碳钢-日本工业标准 Cold-Rolled (Special Steel) Carb on Steel Strip to JIS G3311冷轧或热轧钢片阔度公差 Width Tolerance of Cold or Hot-rolled sheet 冷轧状态 Cold Rolled Strip 冷辘(低碳)钢片的分类用、途、工业标准、品质、加热状态及硬度表 End usages, industrial standard, quality, condition and hardness of cold rolled steel strip冷辘低碳钢片 (双单光片 )( 日工标准
37、JIS G3141) 73 - 95 Cold Rolled (Low carbon) Steel Strip (to JIS G 3141)冷辘钢捆片及张片的电镀和印刷方法 Cold rolled steel coil & sheet electro-plating & painting method冷辘钢捆片及张片制作流程图表 Production flow chart cold rolled steelcoil sheet冷辘钢片 (拉力: 30-32 公斤/ 平方米)在没有表面处理状态下的焊接状况 Spot welding conditions for
38、bared (free from paint, oxides etc) Cold rolledmild steel sheets(T/S:30-32 Kgf/卩 m2)冷辘钢片储存与处理提示 General advice on handling & storage of cold rolled steel coil & sheet冷辘钢片的"理论重量"计算方程式Cold Rolled Steel Sheet - Theoretical mass冷辘钢片订货需知 Ordering of cold rolled steel strip/sheet
39、理论质量 Theoretical Mass连续铸造法 Continuous casting process两面不均等锡层 Both Side Different Thickness Coated Mass 两面均等锡层 Both Side Equally Coated Mass 裂纹之容许深度及脱碳层 Permissible depth of flaw and decarburized layer 临界温度 Critical temperture马氏体不锈钢 Martensite Stainless Steel马氏铁体淬火 Marquenching埋弧焊 Submerged-arc Weldi
40、ng 每公斤发条的长度简易公式 The Length of 1 Kg of Spring Steel Strip 美材试标准的冷辘低碳钢片 Cold Rolled Steel Strip American Sta ndard-American Society for testing and materials (ASTM)美国工业标准-不锈钢及防热钢材的化学成份(先数字后字母排列)AISI -Chemical Composition of Stainless Steel & Heat-Resistant Steel(inorder of number & alp
41、habet)米勒指数 Mill's Index魔术手环 Magic Tape魔术手环尺寸图 Drawing of Magic Tap 耐热不锈钢 Heat-Resistance Stainless Steel 耐热不锈钢比重表 Specific Gravity of Heat - resista nee steel plates and sheets stainless steel镍铬 -日工标准 G4102 63 Chrome Nickel steel to JIS G4102 镍铬耐热钢 Ni - Cr Heat Resistance Steel 镍铬系不锈钢 Nickel Chr
42、ome Stainless Steel 镍铬系耐热不锈钢特性、化学成份、及操作温度 Heat-Resistance Stainless Steel镍铬钼钢 -日工标准 G4103 64 Nickel, Chrome& MolybdenumSteel to JIS G4103疲劳测试 Fatigue Test片及板材 Chapter Four-Strip, Steel & Plate平坦度 ( 阔度大于 500 公厘，标准回火 ) Flatness (width>500mm, temper: standard)破坏的检验 Destructiv
43、e Inspection 其它焊接材料请参阅日工标准目录 Other Soldering Material 其它日工标准冷轧钢片 （ 用途及编号 ） JIS standard & application of other cold Rolled Special Steel 气焊 Gas Welding 潜变测试 Creep Test 潜变强度 Creeps Strength 强度 Strength 琴线（日本标准 G3522） Piano Wires （ to G3522） 球化退火 Spheroidizing Annealing 曲面（假曲率） Camber 屈服强度 （降伏
44、强度） （Yield strangth） 全静钢 Killed steel 热力应先从工件边缘透入 Heat from the Laminated Stacks Edges 热膨胀系数 Coefficient of thermal expansion 热轧钢片 Hot-Rolled Sheet/Strip 热轧钢片厚度公差 Thickness Tolerance of Hot-rolled sheet 日本工业标准-不锈钢的化学成份（先数字后字母排列）JIS - ChemicalComposition of Stainless Steel （in order of number &am
45、p; alphabet）日工标准（JIS G3141冷辘钢片化学成份 Chemical composition - cold rolled steel sheet to JIS G3141日工标准（JIS G3141）冷辘钢片重量列表 Mass of Cold-Rolled Steel Sheet to JIS G3141 日工标准 JIS G3141 冷辘低碳钢片 （双单光片 ）的编号浅释 Decoding of cold rolled（Low carbon）steel strip JIS G3141 日工标准下的特殊钢材 Specail Steel according to JIS Sta
46、ndard 熔铸 Casting 软磁 Soft Magnetic 软磁材料 Soft Magnetic Material 软焊 Soldering Alloy 软焊合金 -日本标准 JIS H 4341 Soldering Alloy to JIS H 4341 上链发条 Wind-up Spring 上漆能力 Paint Adhesion 伸长度 Elongation 渗碳体 Cementitle 渗透探伤法 Penetrate inspection 生产流程 Production Flow Chart 生锈速度表 Speed of rusting 时间淬火 Time Quenching
47、时间效应 （ 老化 ） 及拉伸应变 Aging & Stretcher Strains 释出硬化不锈钢 Precipitation Hardening Stainless Steel 双相辗压镀锡薄钢片 （马口铁/白铁皮） Dual-Reduction Tinplate 顺磁体 Paramagnetic 碳钢回火 Tempering碳污染 Prevent Carbon Contamination 特点 Characteristic 特殊钢 Special Steel 特殊钢以用途来分类 Classification of Special Steel according to E
48、nd Usage 特殊钢以原素分类 Classification of Special Steel according to Element 提防过份氧化 No Excessive Oxidation 铁磁体 Ferromagnetism 铁铬系不锈钢片 Chrome Stainless Steel 铁及非铁金属 Ferrous & Non Ferrous Metal 铁锰铝不锈钢 Fe / Mn / Al / Stainless Steel 铁线(低碳钢线 )日工标准 JIS G 3532 Low Carbon Steel Wires ( Iron Wire ) to JIS
49、 G 3532 铁相 Steel Phases 同素变态 Allotropic Transformation 铜基层金属 Copper as Base Metal 透磁度 Magnetic Permeability 退火 Annealing 退火时注意事项 Annealing Precautionary 外价电子 Outer valence electrons 弯度 Camber 完全退火 Full Annealing 物理性能 Physical Properties 物料科学 Material Science 物料科学定义 Material Science Definition 锡层质量 M
50、ass of Tin Coating (JIS G3303-1987) 锡基、铅基及锌基轴承合金比较表 Comparison of Tin base, Lead base and Zinc base alloy for Bearing purpose 细线材、枝材、棒材 Chapter Five Wire, Rod & Bar 显微观察法 Microscopic inspection线材/ 枝材材质分类及制成品 Classification and End Products of Wire/Rod 线径、公差及机械性能 (日本工业标准 G 3521) Mechanical Pr
51、operties (JIS G 3521) 相反旋转 Opposite span 相律 Phase Rule 锌包层之重量，铜硫酸盐试验之酸洗次数及 测试用卷筒直径 Weight of Zinc-Coating, Number of Dippings inCupric Sulphate Test and Diameters of Mandrel Used for Coiling Test 锌镀层质量 Zinc Coating Mass 锌镀层质量(两个不同锌镀层厚度) Mass Calculation of coating (For differential coating)/MM锌镀层质量
52、（ 两个相同锌镀层厚度 ） Mass Calculation of coating （For equal coating）/MM 亚共晶体 Hypoeutetic Alloy 亚铁磁体 Ferrimagnetism 亚铁释体 Hyppo-Eutectoid 延轧 Rolling 颜色 Colour 易车（快削）不锈钢 Free Cutting Stainless Steel 易车（快削）不锈钢拉力表 Tensile Strength of Free Cutting Wires 易车（快削）不锈钢种类 Type of steel 易车不锈钢及易车钢之不同尺寸及硬度比较 Hardness of D
53、ifferent Types & Size of Free Cutting Steel 易车碳钢 Free Cutting Carbon Steels （to JIS G4804 ） 易溶合金 Fusible Alloy应力退火温度 Stress- relieving Annealing Temperature应用材料 Material Used 硬磁 Hard Magnetic 硬磁材料 Hard Magnetic Material 硬度 Hardness 硬度及拉力 Hardness & Tensile strength test 硬焊 Brazing Al
54、loy 硬化 Work Hardening 硬化性能 Hardenability用含碳量分类-即低碳钢、中碳钢及高碳钢Classification According toCarbon Contains 用途 End Usages用组织结构分类 Classification According to Grain Structure 幼珠光体 Fine pearlite元素的原子序数 Atom of Elements 原子的组成、大小、体积和单位图表 The size, mass, charge of an atom, and is particles （Pronton,Nentron and
55、Electron） 原子的组织图 Atom Constitutes原子及固体物质 Atom and solid material 原子键结 Atom Bonding 圆钢枝，方钢枝及六角钢枝之形状及尺寸之公差Tolerance on Shape andDimensions for Round Steel Bar,Square Steel Bar, Hexagonal Steel Bar 圆径及偏圆度之公差 Tolerance of Wire Diameters & Ovality 圆面（" 卜竹"）发条 Convex Spring Strip 再结晶 Rec
56、rystallization 正磁化率 Positive magnetic susceptibility 枝/ 棒无芯磨公差表（卩）（卩=1/100 mm）Rod/Bar Centreless Grind Toleranee 枝材之美工标准，日工标准，用途及化学成份 AISI, JIS End Usageand Chemical Composition of Cold Drawn Carbon Steel Shafting Bar直径，公差及拉力强度 Diameter, Tolerance and Tensile Strength 直径公差，偏圆度及脱碳层的平均深度 Diameter Tole
57、rance, Ovality and Average Decarburized Layer Depth 置换型固熔体 Substitutional type solid solution 滞后回线 Narrow Hystersis 中途退火 Process Annealing 中珠光体 Medium pearlite 周期表 Periodic Table 轴承合金 Bearing Alloy轴承合金-日工标准 JIS H 5401 Bearing Alloy to JIS H 5401 珠光体 Pearlite珠光体及共释钢 Pearlite &Eutectoid 主要金属元素
58、之物理性质 Physical properties of major Metal Elements 转变元素 Transition element 自发上磁 Spontaneous magnetization 自由度 Degree of freedom最大能量积 Maximum Energy Product 化学成份分析表 Chemical Analysis of Wire Rod 305, 316, 321 及 347 之拉力表 Tensile Strength Requirements for Types 305, 316, 321 and 347A1S1-302 贰级线材之拉力表 Ten
59、sile Strength of A1S1-302 WireGrain Oriented & Non-Oriented 电器用硅 硅 钢片的最终用途及规格 End Usage and Designations of Electrical Steel StripOriented Electrical Steel SheetsSK-5 & AISI-301 每公尺长的重量 /公斤(阔 2.0-10 公厘) Weight per one meter long (kg) (Width 2.0-10mm)SK-5 & AISI-301 每公斤长的重量 /公
60、斤(阔100-200公厘) Weight per one meter long (kg) (Width 100-200mm)SK-5 & AISI-301 每公斤之长度 (阔 100-200 公厘) Length per one kg (Width 100-200mm)SK-5 & AISI-301 每公斤之长度 (阔2.0-10 公厘) Length per one kg (Width 2.0-10mm)仅供个人用于学习、研究；不得用于商业用途。For personal use only in study and research; not for comme
61、rcial use.Nur f u r den pers?nlichen fu r Studien, Forschung, zu kommerziellen Zwecken verwendet werden.Pour l ' e tude et la recherche uniquementa des fins personnelles; pasa des fins commerciales.t o ji e k o gfljirogeifcc, TOpBicnob3 groimio 麻yqeHuicic 码 egoBua Hedo 员冶hbi ucno 员 B30BaTbCEb KoMMepqeckux qeiix.以下无正文For personal use only in study and research; not for commercial use
