中英文文献翻译-一个简化双螺杆旋转食品挤压机设计，制造和检验.doc
上传者：小健
2022-07-11 21:37:30上传
DOC文件
356 KB
中英文文献翻译-一个简化双螺杆旋转食品挤压机：设计，制造和检验.docA simplified twin screw co-rotating food extruder: design, fabrication and testing
S.A.M.A.N.S. Senanayake a, B. Clarke b,*
Division of Agricultural and Plantation Engineering, The Open University of Sri Lanka, Nawala, Nugegoda, Sri Lanka
Department of Postharvest Technology, School of Agriculture, Food and Environment, Silsoe
Collage, Cranfield University, Silsoe, Bedfordshire MK45 4DT,UK
Received 6 July 199& accepted 10 February 1999
Abstract
A simplified co-rotating twin screw food extruder was designed, fabricated and tested in England, followed by extensive testing in Sri Lanka. It was built as a model to meet the specific product and financial constraints of less developed countries and was expected to be used in those countries to widen the production capabilities of extruded foods. The machine had an estimated delivery of 10 k妙h and was made mainly with mild steel. Two types of screw were made, one with a constant pitch of 14 mm and the other with varying pitch in segments of 14, 12 and 10 mm. The machine was powered by a 2.2 kW electric motor with electronic speed control .The machine also had electrical heating with a temperature controller and a pressure sensing device. The cost of fabrication of the
machine was estimated at £2000 with most of the parts built in a fairly simple workshop. A mixture of rice and dried banana was successfully extruded as a potential snack food and on the basis of maximum expansion the best results was obtained from a barrel temperature of 120°C, screw speed 125 rpm, feed moisture 15% and with a die orifice size of 3 mm. When the alternative compress ion screw was tested very similar results were achieved with no significant improvement in product expansion. © 1999 Elsevier Science Ltd. All rights reserved.
Keywords: Twin screw extruder; Design; Low cost; Snack food; Continuous cooker; Local construction; Cereal mixtures
Nomenclature
a Die diameter (mm)
B Channel width (mm)
C Scr
S.A.M.A.N.S. Senanayake a, B. Clarke b,*
Division of Agricultural and Plantation Engineering, The Open University of Sri Lanka, Nawala, Nugegoda, Sri Lanka
Department of Postharvest Technology, School of Agriculture, Food and Environment, Silsoe
Collage, Cranfield University, Silsoe, Bedfordshire MK45 4DT,UK
Received 6 July 199& accepted 10 February 1999
Abstract
A simplified co-rotating twin screw food extruder was designed, fabricated and tested in England, followed by extensive testing in Sri Lanka. It was built as a model to meet the specific product and financial constraints of less developed countries and was expected to be used in those countries to widen the production capabilities of extruded foods. The machine had an estimated delivery of 10 k妙h and was made mainly with mild steel. Two types of screw were made, one with a constant pitch of 14 mm and the other with varying pitch in segments of 14, 12 and 10 mm. The machine was powered by a 2.2 kW electric motor with electronic speed control .The machine also had electrical heating with a temperature controller and a pressure sensing device. The cost of fabrication of the
machine was estimated at £2000 with most of the parts built in a fairly simple workshop. A mixture of rice and dried banana was successfully extruded as a potential snack food and on the basis of maximum expansion the best results was obtained from a barrel temperature of 120°C, screw speed 125 rpm, feed moisture 15% and with a die orifice size of 3 mm. When the alternative compress ion screw was tested very similar results were achieved with no significant improvement in product expansion. © 1999 Elsevier Science Ltd. All rights reserved.
Keywords: Twin screw extruder; Design; Low cost; Snack food; Continuous cooker; Local construction; Cereal mixtures
Nomenclature
a Die diameter (mm)
B Channel width (mm)
C Scr
中英文文献翻译-一个简化双螺杆旋转食品挤压机：设计，制造和检验
